Be sure to click the save button when changing values. Enter the Plasma Divisor, and select the Voltage Range from the combobox.Navigate to the Settings tab and select Torch Height Control from the column on the left. Configure the torch interface settings.The Plasma Settings in the center of the screen does not have a model displayed. After loading, you will see the main screen.If the machine has not yet been initialized, you will need to select the "instance" by choosing the only one offered.This will initialize the controller and start the interface program. The first time the MAD GUI software runs we are required to initialize settings, and verify that hardware connection choices (plasma unit, torch interface range, etc.) are set properly. When the computer completes shutting down, turn the disconnect on the control panel to the OFF position.Follow these steps to minimize the risk of data corruption in the controller: Shutting down the machine is slightly more complicated than powering on. Turn the disconnect switch to the on position.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |